Hours: Monday - Friday 8:00 am - 5:00 pm


Avoid these common pitfalls when establishing a retirement plan

TAX ALERT | September 28, 2022

Authored by RSM US LLP

While the most intuitive starting point in establishing a retirement plan is deciding the specific type of plan to adopt, it’s not the only fundamental decision facing employers. Overlooking other factors impacting plan establishment could lead to costly missteps, such as plan disqualification. These factors often have ongoing ramifications and should be revisited on a regular basis.

To avoid common errors, employers should assess considerations including controlled or affiliated service group status of the employer, employee groups eligible for the plan, and service providers who are responsible for administering the plan and ensuring compliance with the Internal Revenue Code and Employee Retirement Income Security Act (ERISA).

Controlled and affiliated service groups

Failing to apply the tax code’s controlled group and affiliated service group rules is a common oversight. Under these complex rules, related employers—both foreign and domestic—are treated as a single employer for certain plan purposes, even if such related employers don’t participate in the plan.

In general, an employee’s service with a controlled group member is counted for plan eligibility and vesting purposes, and the mandatory nondiscrimination tests designed to prevent the plan from disproportionately favoring highly compensated employees must be applied across the employer’s controlled group. These rules pull together entities with certain levels of common ownership or with service relationships. To further complicate the determination, ownership attribution rules apply to spouses, certain family members, estates and trusts, and other relationships.

Crediting service is one issue for these groups. Take, for example, ABC Inc., sponsor of a 401(k) plan. Jane is hired by ABC after working with DEF Co. for three years. ABC is unaware its parent company also owns 80% of DEF. As a result, an operational error occurs when ABC fails to credit Jane with her three years of service at DEF for vesting purposes under the plan.

Employers can prevent common pitfalls by checking the plan’s eligibility provisions to avoid inadvertently sweeping in unintended controlled or affiliated service group members and confirming that only intended employee groups are covered. Where participation by a controlled or affiliated service group member is intended, that member must separately adopt the plan.

Notably, service providers contracted to perform nondiscrimination testing often require the employer to certify its controlled or affiliated service group status and provide a list of other group members. An employer can avoid errors by engaging an accountant or lawyer to perform the analysis underlying the certification.

Eligible employees

An employer is largely free to choose the employee groups covered by the plan, subject to nondiscrimination testing. However, errors often occur regarding the inclusion or exclusion of certain employees under additional rules.

  • Excludable employees. Union employees, certain noncitizens, employees under age 21, and employees scheduled to work less than 1,000 hours per year may be excluded from plan eligibility and nondiscrimination testing.

    This last rule prohibits the blanket exclusion of part-time, temporary, and seasonal employees unless the plan language limits the exclusion to those with less than 1,000 hours of service. Further, under a new rule effective in 2024, long-term, part-time employees with at least 500 hours of service per year for three consecutive years of employment must be included in a 401(k) plan for purposes of making elective 401(k) contributions.

  • “Leased” employees. Employers often miss that an employee’s service as a so-called leased employee may count for eligibility and vesting purposes under the leasing employer’s retirement plan. For example, a temporary employee’s service with a business while employed by a temp agency must be counted under the employer’s plan if the temp is later hired by that business as a common-law employee.

    Additionally, unless leased employees are expressly excluded from plan eligibility, those who perform substantially full-time services for the business while employed by the leasing organization may be eligible for the plan in the same way as common-law employees.

  • Self-employed persons. A self-employed person—such as a sole proprietor, partner, or LLC member who performs services for the sponsoring employer—may participate in the employer’s qualified retirement plan as long as the plan defines the person’s eligible compensation as net income from self-employment, including the partnership distributive share and any guaranteed payments.

    For a partnership, the pitfall lies in not understanding the partners are considered “employees” for retirement plan purposes; therefore, each partner cannot establish their own plan. Rather, the partnership is the sponsoring employer.

Plan operation

Employers typically engage third-party service providers to administer the plan in compliance with applicable rules. But the employer retains ERISA responsibility for selecting them and is responsible for the costs of noncompliance with the tax code. A common pitfall is failing to educate employees involved with the plan on applicable administrative and fiduciary compliance requirements, or to provide an understanding of the services for which they are responsible, versus those contracted out to third-party providers. Fiduciary liability insurance should be considered.

Multiple third parties may provide plan services, such as a CPA firm, third-party administrator, recordkeeper, trustee or custodian, attorney, investment adviser, or payroll provider. The employer should review each service agreement for the specific services provided, minimum performance standards, reasonableness of fees, liability limits, data security, and other provisions.

Plan operational errors inevitably occur due to the complexity and volume of the rules and regulations pertaining to qualified retirement plans. Failing to apply the plan’s definition of eligible compensation is a common error. Employers should check that payroll provider pay codes accurately reflect the compensation elements required by the plan definition to allocate plan contributions, apply statutory limits, and perform nondiscrimination testing.

Another common plan error is the failure to timely remit to the plan amounts deducted from employee payroll for salary deferrals and plan loan repayments. Applicable rules require deposit on the earliest date such amounts may reasonably be segregated from employer assets—often a matter of a day or two—given the employer’s reasonable administrative processes, but in no event later than the 15th business day of the next month. Many employers mistake the “15th business day” rule as a safe harbor deadline, which isn’t the case. The only permissible safe harbor is seven business days for small plans, defined as those with fewer than 100 participants.

When errors do occur, the employer should consult with its service providers for guidance and assistance in taking appropriate corrective actions to avoid putting the plan in jeopardy of losing its tax-qualified status.

The takeaway

Employers looking to adopt a qualified retirement plan have many decisions to make. Taking time to avoid pitfalls relating to their structure and workforce and to gain an understanding of where compliance responsibilities lie will be rewarded with smoother plan operation and avoidance of unnecessary costs.

Reproduced with permission from Copyright 2022 The Bureau of National Affairs, Inc. (800-372-1033) www.bloombergindustry.com. Originally published on Bloomberg Tax and Accounting.

Let's Talk!

Call us at (325) 677-6251 or fill out the form below and we'll contact you to discuss your specific situation.

  • Topic Name:
  • Should be Empty:

This article was written by Joni Andrioff, Christy Fillingame, Lauren Sanchez and originally appeared on 2022-09-28.
2022 RSM US LLP. All rights reserved.

The information contained herein is general in nature and based on authorities that are subject to change. RSM US LLP guarantees neither the accuracy nor completeness of any information and is not responsible for any errors or omissions, or for results obtained by others as a result of reliance upon such information. RSM US LLP assumes no obligation to inform the reader of any changes in tax laws or other factors that could affect information contained herein. This publication does not, and is not intended to, provide legal, tax or accounting advice, and readers should consult their tax advisors concerning the application of tax laws to their particular situations. This analysis is not tax advice and is not intended or written to be used, and cannot be used, for purposes of avoiding tax penalties that may be imposed on any taxpayer.

RSM US Alliance provides its members with access to resources of RSM US LLP. RSM US Alliance member firms are separate and independent businesses and legal entities that are responsible for their own acts and omissions, and each is separate and independent from RSM US LLP. RSM US LLP is the U.S. member firm of RSM International, a global network of independent audit, tax, and consulting firms. Members of RSM US Alliance have access to RSM International resources through RSM US LLP but are not member firms of RSM International. Visit rsmus.com/about us for more information regarding RSM US LLP and RSM International. The RSM logo is used under license by RSM US LLP. RSM US Alliance products and services are proprietary to RSM US LLP.

Condley and Company, LLP is a proud member of the RSM US Alliance, a premier affiliation of independent accounting and consulting firms in the United States. RSM US Alliance provides our firm with access to resources of RSM US LLP, the leading provider of audit, tax and consulting services focused on the middle market. RSM US LLP is a licensed CPA firm and the U.S. member of RSM International, a global network of independent audit, tax and consulting firms with more than 43,000 people in over 120 countries.

Our membership in RSM US Alliance has elevated our capabilities in the marketplace, helping to differentiate our firm from the competition while allowing us to maintain our independence and entrepreneurial culture. We have access to a valuable peer network of like-sized firms as well as a broad range of tools, expertise and technical resources.

For more information on how Condley and Company can assist you, please call (325) 677-6251.

Share This